Perfect in shape

Simple interfacing, best suited for small parts such as collars, cuffs etc. on blouses and dresses.

Fabric:
Lightweight fabrics such as cotton, polyester etc.

Advantages:

* Simple to iron-on
* Very comfortable
* Also washable at higher temperatures



Method of use:
Place the interfacing with the coated side on the wrong side of the fabric. Cover the entire area with a damp cloth. Press each area for about 10 to 12 seconds, being careful not to move the iron. Iron setting: Wool / cotton. Allow the pieces to cool flat for about 20 minutes, so that the adhesive can set properly.
We strongly recommend that you attach a small piece of interfacing to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Care:
Washable in temperatures up to 60 °C or dry cleanable

Colours / Measurements:
White and charcoal: Width 90 cm, sold by the metre

Perfect in shape

Soft Interfacing universally usable for the front sections of waistcoats, jackets and coats as well as for collars, pockets, flaps etc.

Fabric:
Light to middle weight fabrics such as wool or raw silk

Advantages:


* Shape retaining
* Flawless fit
* Strong yet adjustable hold



Method of use:
Place the Interfacing with the coated side on the wrong side of the fabric. Cover the entire area with a damp ironing cloth. Press each area for about 10 to 12 seconds, being careful not to move the iron.Iron setting: Wool/cotton.

Allow the pieces to cool flat for about 30 minutes, so that the can set properly.

We strongly recommend that you attach a small piece of interfacing to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Care:
Washable in temperatures up to 40 °C or dry cleanable

Colours / Measurements:
White, charcoal: Width 90 cm

Middle-weight cotton interfacing for small parts of blouses and shirts.

Fabric:
Light to middle-weight fabrics, e.g. cotton

Advantages:

* Simple to apply with a steam iron
* Washable in temperatures up to 60 °C
* Retains shape

Method of use:
Like all interfacings made by Vilene, the interfacing is always cut in a lengthwise direction, and thereby follows the grain of the fabric. Place the interfacing with the coated side on the wrong side of the fabric, glide the steam iron slowly over each area 6 x or cover with a damp cloth and press each area for about 12 seconds, without moving the iron
Iron setting: Cotton
Allow the pieces to cool flat for about 30 minutes, so that the adhesive can set properly.
We strongly recommend that you attach a small piece of interfacing to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Care:
Washable in temperatures up to 60 °C or dry cleanable

Simple textured cotton interfacing for front parts of jackets, coats, etc. as well as for small pieces.

Fabric:
Middle to heavy-weight fabrics, such as wool or fabric blends

Advantages:

* Simple to apply with a steam iron
* Retains shape perfectly

Method of use:
Like all interfacing made by Vilene, the insert is always cut in a lengthwise direction, and thereby follows the grain of the material.Place the interfacing with the coated side on the wrong side of the fabric, glide the steam iron slowly over each area 6 x and cover with a damp cloth and press each area for about 12 seconds, without letting the iron move. Iron setting: Cotton
Allow the pieces to cool flat for about 30 minutes, so that the adhesive can set properly.
We strongly recommend that you attach a small piece of interfacing to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Care:
Washable in temperatures up to 30 °C in the gentle cycle or dry cleanable

Very delicate, light and two-way stretch woven interfacing for small pieces on blouses and dresses as well as the front portions of jackets and coats out of lightweight materials.

Fabric:
Lightweight fabrics such as silk, viscose, cupro, acetate, also very suitable for Cool Wool, but especially for stretchable fabrics!

Advantages:

* Two-way stretch
* Excellent hold on difficult fabrics such as e.g. viscose, acetate and cuprous, even coated fabrics
* Comfortable to wear
* Strong but flexible feel

Method of use:
Like all interfacing made by Vilene, the interfacing is always cut in a lengthwise direction, and thereby follows the grain of the fabric.
Using a low heat – iron setting at wool/silk – first apply quickly to prevent any warping, then slowly glide the iron with pressure 6 x over the entire area - iron setting: wool/cotton.

Allow the pieces to cool flat for about 30 minutes, so that the adhesive can set properly.

We strongly recommend that you attach a small piece of interfacing to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Care:
Washable in temperatures up to 30 °C in the gentle cycle or dry cleanable

Perfect in Shape

Particularly soft and lightweight interfacing. Ideal for small parts such as collars, cuffs, etc. as well as for the front parts of jackets and stylish blazers made in very light to middle weight fabrics.

Fabric:
Delicate flowing fabrics such as silk, viscose, acetate and cuprous etc. Also suitable for Cool Wool.

Advantages:


* Excellent hold on difficult stylish fabrics such as e.g. viscose, acetate and cuprous
* Simple to iron-on
* Comfortable to wear
* Strong yet flexible feel



Method of use:
Place the interfacing with the coated side on the wrong side of the fabric. Then using dry heat glide the iron firmly 5-6 times very slowly over each area of the insert, so that each area receives approx. 8 seconds of heat.
Iron setting: silk/wool.

Allow the pieces to cool flat for about 20 minutes, so that the adhesive can set properly.

We strongly recommend that you attach a small piece of interfacing to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Care:
Washable in temperatures up to 40 °C or dry cleanable

A simple interfacing with some stability. For small parts such as collars, cuffs, etc. on blouses and dresses.

Fabric:
Lightweight fabrics such as cotton, polyester etc.

Advantages:

* Simple to iron-on
* Comfortable to wear
* Flexible feel

Method of use:
Place the interfacing with the coated side on the wrong side of the fabric. Then using dry heat glide the iron firmly 5-6 times very slowly over each area of the insert, so that each area receives approx. 8 seconds of heat.
Iron setting: Wool
Allow the pieces to cool flat for about 20 minutes, so that the adhesive can set properly.

We strongly recommend that you attach a small piece of interfacing to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Care:
Washable in temperatures up to 40 °C or dry cleanable

Stable iron-on Interfacing for shaped bands, shaped belts and handicrafts. Prevents stretching and ensures retained shape.

Fabric:
Light to middle weight fabrics such as e.g. cotton, Trivia®

Advantages:

* Simple to apply
* Long lasting shape
* Also washable at higher temperatures

Method of use:
Place the interfacing with the coated side on the wrong side of the fabric. Then using dry heat glide the iron firmly 5-6 times very slowly over each area of the insert, so that each area receives approx. 8 seconds of heat.

Iron setting: Wool.

Allow the pieces to cool flat for about 20 minutes, so that the adhesive can set properly.

We strongly recommend that you attach a small piece of Interfacing to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Care:
Washable in temperatures up to 60 °C or dry cleanable

Soft, iron-on interfacing with stabilising threads along the grain. These threads also help even particularly soft fabrics to retain their shape. For the front sections and accessories of waistcoats, jackets and coats as well as for collars, pockets flaps etc.

Fabric:
Light to heavyweight fabrics such as e.g. wool, raw silk or jersey

Advantages:
* Retains perfect shape through threads along the grain
* Comfortable to wear
* Strong yet flexible feel

Method of use:
mportant – the thread along the grain of the interfacing must follow the grain of the fabric. Place the interfacing with the coated side on the wrong side of the fabric. Cover the entire area with a damp cloth. Press each area for about 10 to 12 seconds, being careful not to move the iron. Iron setting: Wool/cotton.
Allow the pieces to cool flat for about 30 minutes, so that the adhesive can set properly.

We strongly recommend that you attach a small piece of interfacing to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Care:
Washable in temperatures up to 40°C or dry cleanable

Indispensable for Quilt and Patchwork Projects as well as warm, light Clothing

Lightweight, iron-on volume fleece . For warm clothing, quilting and other handicrafts, as well as for soft valances and voluminous curtain swags.

Fabric:
Light to heavy-weight fabrics

Advantages:

* Easy to work with
* light volume
* no shifting while sewing

Method of use:
Place the interlining with the coated side on the wrong side of the fabric. Cover with a damp cloth and press each area for about 15 seconds, without pushing the iron. Iron setting: Wool/Cotton. Allow the pieces to cool flat for about 30 minutes, so that the adhesive can set properly.

Iron setting: Wool.

We strongly recommend that you attach a small piece of interlining to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Care:
Washable in temperatures up to 40 °C in the gentle cycle or dry cleanable

Indispensable for Quilt and Patchwork Projects as well as warm, light Clothing

Fluffy volume fleece for iron-on. Ideal for all bulky projects. For winter clothing, also for quilting and patchwork projects such as wall hangings, bedspreads and other handicrafts.

Fabric:
Light to heavy-weight fabrics

Advantages:
* Thickest iron-on volume fleece
* Easy to work with
* No shifting while sewing



Method of use:
Place the volume fleece with the coated side on the wrong side of the overlay. Cover with a damp cloth and press each area for about 15 seconds, without pushing the iron. Iron setting: Wool/Cotton. Allow the pieces to cool flat for about 30 minutes, so that the adhesive can set properly.
Iron setting: Wool/Cotton

We strongly recommend that you attach a small piece of interfacing to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Care:
Washable in temperatures up to 40 °C in the gentle cycle or dry cleanable

Peel-off sewing aids with imprinted triangles for patterns at 60° angles such as e.g. stars, baby blocks, hexagon, triangles, diamonds or trapezoids. The different lines ease cutting and sewing of the different motifs.

Fabric:
Usable for all fabrics

Advantages:
* Accurate results
* Clear optics
* Simple to use

Method of use:
The broken lines are the cutting guides and include the seam allowance. The solid lines are the sewing guides. Lay the fabric pieces on the blank side of the Vilene Quilt 60 and pin together. Turn the block over and sew on the printed side.

Care:
Washable in temperatures up to 40 °C or dry cleanable.

Interfacing with printed 1x1 cm grid. Patchwork with Quickscreen is the logical alternative to traditional stencil techniques. Geometric patterns and shapes are quickly and easily transferred. Is also extremely suitable for the transfer and enlargement of cut and design drawings.

Fabric:
Usable for all fabrics

Advantages:
* Quick and accurate to use
* Ideal for geometric patterns
* Clear optics

Method of use:
Always lay the fabric pieces on the blank side. Using the edge guide sew along the lines. With diagonally drawn lines the materials are firmly pinned into place on the blank side and sewn on the printed side or along the lines. Turn the fabric strips and attach and sew the next strip. Follow the pattern until the patchwork is finished.

Care:
Washable in temperatures up to 40 °C or dry cleanable

Lighter valance interfacing, suitable for blends on blinds. Can also be used for hats, belts, fabric bags, handicrafts etc.

Fabric:
Decorative fabrics, cotton etc.

Advantages:
* Washable and dry cleanable valance interfacing Smooth, fabric look
* Retains shape
* Secure and comfortable to iron on

Method of use:
Iron setting: Wool / Cotton. Cover with a damp cloth; press each area for 15 seconds

Power steam iron: 160°C (without teflon shoe), wool / cotton slowly glide the iron with sporadic steam and pressure 5 - 6 x over each area for approx. 15 seconds.We strongly recommend that you attach a small piece of interfacing to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Care:
Washable in temperatures up to 40 °C or dry cleanable

Vilene Soluvlies / Solufleece is a water soluble nonwoven and a stabilizer for all machine embroideries and new creative techniques. Soluvlies / Solufleece is easily washed out without leaving any traces and dissolves in cold and warm water.

Fabric:
* Very delicate and/or sheer fabrics
* Lingerie and linen fabrics
* Div. fabrics (e.g. silk)

Advantages:
* Stabilizer for all machine embroideries
* Easily washed out - dissolves in cold and warm water
* Very good stabilizing properties and ease of use
* Versatile application, e.g. for free hand lace embroidery, appliqués and similar motifs.
* For creating collages using a \\\\"pizza technique\\\\"
* Ideal sewing aid for mini quilts.

Method of use:
Place Soluvlies under the fabric, clamp the Soluvlies and fabric in the embroidery frame or embroider the motif directly onto the Soluvlies, without fabric. Then simply wash out the Soluvlies. For collages and \\\\"pizza technique\\\\", lay the Soluvlies down, arrange the Fabrics (fabric pieces, yarns, ribbons, lacing, etc.), cover with Soluvlies, and sew all layers together, either in a grid or criss-cross pattern. Wash out the Soluvlies.

Care:
Iron very carefully, without steam!
Iron setting chemical fibres/nylon (setting 1)